Lynx L4-116 1.9L VIN J FI HP (1986)
1. Remove the insulator from the driver's side outboard seat track. If equipped with a plastic front sight shield, remove the front retaining screw and
position the sight shield out of the way.
2. Inspect the seat track for design level. (Refer to Figure 1).
3. If the car is equipped with the latest design level track, it is not involved in the recall and does not require modification or replacement. Release the
car.
4. If the car is equipped with the 1985-1987 model design level track, modify or replace it following the technical instructions provided in the original
Recall Bulletin 89S73.
According to our records, the additional vehicle(s) shown on the enclosed listing have been delivered to your dealership. Note: If no vehicle listing is
