Lynx L4-116 1.9L VIN J FI HP (1986)
in Box "B" of Form 1864
Administrative Allowance (Additive to Above)
Administrative Allowance . . . . . . . . 0.1 Hr.
The 0.1 hour administrative allowance must be added before inserting the total labor time in Box "B" of the Form 1864.
REPORTING
Use the Form 1864 to report completed vehicles.
COMPLETIONS
ATTACHMENTS
Attachment I - Technical Instructions
Attachment II - Owner Notification Letter
FPSD
Any problems encountered with this recall should be
ASSISTANCE
discussed with your FPSD Service Zone Manager.
Attachment I - Technical Instructions For Recall 89E76
FIGURE 1
Attachment I
TECHNICAL INSTRUCTIONS FOR RECALL 89E76
FOR VEHICLES WITH CALIBRATION 6-08A-R17 (REPAIR CODE A AND B VEHICLES)
1.
Refer to Figure 1. Locate the crankcase vent assembly. Remove and discard the existing assembly and replace with new assembly (Part Number
E8FZ-6769-A).
2.
Locate, remove and discard the existing two-way vacuum delay valve (# 5, white) in the choke pulldown vacuum line. Install a 383003-S straight
vacuum line connector in the vacuum line where the valve was installed.
3.
Install a vacuum delay valve (Part Number D30Z-12A091-B, # 30, orange/black) in the vacuum line connected to the distributor vacuum
diaphragm using a 3-inch length of vacuum hose (Part Number D0PZ-12226-B 5/32" i.d.). Position the orange side of the valve toward the
distributor.