mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Engine - Idle Speed Fluctuation|Page 2744 > < Engine - Idle Speed Fluctuation|Page 2742
Page 19
background image

1983-87 LYNX 
1984-88 CAPRI 
1984-90 COUGAR 
1986-90 CONTINENTAL, MARK VII, SABLE 
1986-91 GRAND MARQUIS, TOWN CAR 
1988-90 TOPAZ 
1991 TRACER

LIGHT TRUCK:

1985-90 BRONCO II, BRONCO
1985-91 ECONOLINE, F-150-350 SERIES 
1985-92 RANGER 
1986-91 AEROSTAR 
1991 EXPLORER

ISSUE:

Hard cold starts, hesitation and stalls on initial start-up or during idle or decel may be caused by sludge in the throttle body and/or idle
by-pass valve. Sludge deposits or oil film on the throttle body bore and plate or the idle air by-pass valve may cause one or more of the
following conditions.

^

Hard Cold Start

^

Stall On Initial Start-Up

^

Stall During Idle

^

Stall During Decel

^

Rough Idle

^

Rolling Idle

^

Hesitation During Acceleration

ACTION:

A new idle air by-pass service kit (F2PZ-9F939-A) is now available for service use to correct sludge contamination concerns of the throttle
bore and plate only. It eliminates the need to clean the majority of past model throttle body applications. Cleaning is not required on sludge
tolerant throttle body designs released for 1991 and newer model years.

Engine - Idle Speed Fluctuation|Page 2744 > < Engine - Idle Speed Fluctuation|Page 2742