Lynx L4-116 1.9L VIN J FI HP (1986)
Power Steering Pump: Service and Repair
Removal and Installation
WITH GASOLINE ENGINE
Escort, EXP, LN7 & Lynx
1.
Remove air cleaner, thermactor pump drive belt and thermactor pump.
2.
Remove power steering reservoir filler extension. Cover opening to prevent entry of dirt.
3.
From underneath vehicle, loosen one power steering pump adjusting bolt and remove one pump to mounting bracket bolt, then disconnect return
hose.
4.
Form engine compartment, loosen one power steering pump adjusting bolt, then loosen pivot and remove drive belts.
5.
Remove the remaining two power steering pump to bracket retaining bolts, then remove pump from bracket by passing pulley through adjusting
bracket opening.
6.
Disconnect pressure hose from power steering pump, then remove pump.
7.
Reverse procedure to install.
