Lynx L4-98 1.6L SOHC Turbo VIN 8 FI (1984)
Heater Core: Service and Repair
With A/C
Fig. 28 Heater core removal
1.
Disconnect battery ground cable and drain cooling system.
2.
Disconnect heater hoses from heater core and plug all lines and fittings.
3.
Remove floor duct from plenum and the Instrument Panel.
4.
Remove screws attaching heater core cover to the Evaporator Case, then remove the heater core and cover from the plenum, Fig. 12.
5.
Reverse procedure to install.
