mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Inside Door Handles - Air Leaks to Interior|Page 7155 > < Inside Door Handles - Air Leaks to Interior|Page 7153
Page 5
background image

The subject article previously published in TSB 82-25-1, dated 12/6/82, is being republished to include other car lines which may be affected with this
concern.

Cold air may leak through the inside door remote handles when the vent window or side window is slightly open and the heater blower motor is off (not
running).

FIGURE 1

To service, apply die cut adhesive backed seal to the outboard side of the inside remote door handle assembly (Figure 1).
Use the following procedure:

1.

Remove the trim panel and water shield (refer to Shop Manual, Section 45-03).

Inside Door Handles - Air Leaks to Interior|Page 7155 > < Inside Door Handles - Air Leaks to Interior|Page 7153