Lynx L4-98 1.6L SOHC VIN 2 2-bbl (1983)
Headlamp Switch: Service and Repair
1982---83
1.
Disconnect battery ground cable, then on vehicles without A/C, the lefthand air vent control cable from the instrument panel.
2.
Remove screws securing fuse panel bracket and position fuse panel to the side.
3.
Place headlamp switch in the ``On'' position and depress the headlamp knob and shaft retainer button on headlamp switch. Remove knob and shaft
assembly.
4.
Remove headlamp switch bezel and disconnect electrical connector, then remove switch.
5.
Reverse procedure to install.
