Mariner 2WD L4-2.3L VIN H Hybrid (2006)
Auxiliary Step / Running Board: Service and Repair
RUNNING BOARD
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the 6 running board bolts.
-
To install, tighten to 25 Nm (18 lb-ft).
3. Remove the running board.
4. Remove the 6 running board support bracket bolts and the 3 running board support brackets.
-
To install, tighten to 25 Nm (18 lb-ft).
5. To install, reverse the removal procedure.
