Mariner 2WD L4-2.3L VIN H Hybrid (2006)
Tachometer: Description and Operation
CLEAN TACHOMETER OUTPUT (CTO)
The PCM uses a crankshaft position (CKP) sensor input to calculate the engine speed. The engine speed information is then output to the transaxle
control module (TCM) through the CTO circuit, as a frequency signal. The PCM also broadcasts a redundant engine speed message to the TCM over the
CAN communication link. When the broadcasted engine speed disagrees with the hardwired CTO signal, or when the CTO circuit fault condition is
detected, the TCM stores an appropriate diagnostic trouble code (DTC).