Mariner 2WD L4-2.3L VIN H Hybrid (2006)
8.
Cut the existing ground eyelets for G102/G104 or G109/G110 near the harness and tape exposed ends to the existing harness.
9.
Route the ground jumper harness service kit eyelets to the ground studs on the HCU bracket and secure the grounds. (Figure 4)
10.
Connect the battery ground cable. For additional information, refer to Workshop Manual (WSM), Section 414-01.
Parts Block
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
080301A
2005-2008 Escape Hybrid,
1.0 Hr.
2006-2008 Mariner Hybrid:
Install Ground Jumper
Harness Service Kit,
Includes Time To Check
For DTCs (Do Not Use
With 12650D)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
2C215
X1
Disclaimer