Mariner 2WD L4-2.3L VIN H Hybrid (2006)
After the urethane adhesive has cured, check for water leaks and add urethane adhesive where needed.
12. If necessary, remove excess urethane adhesive from the exterior surface of the windshield glass.
13. Install the cowl panel grille.
14. Reposition the front portion of the headliner.
15. Position the 2 sun visors and 2 clips and install the 4 sun visor screws and 2 clip screws.
16. Install the interior rear view mirror.
17. Position the overhead console and install the 2 overhead console screws.
-
If equipped, connect the electrical connector.
18. Install the 2 windshield side garnish mouldings.
19. Position the 2 A-pillar passenger assist handles and install the 4 A-pillar passenger assist handle bolts and 4 covers.
-
Tighten to 5 Nm (44 lb-in).
