Mariner 2WD L4-2.3L VIN Z (2005)
Alarm System Transponder: Service and Repair
PASSIVE ANTI-THEFT SYSTEM (PATS) TRANSCEIVER
Removal and Installation
1. Remove the instrument panel steering column cover.
2. Remove the ignition lock cylinder.
3. Remove the 3 steering column shroud screws and the lower steering column shrouds.
4. Remove the PATS transceiver screw.
5. Disconnect and remove the transceiver assembly electrical connector.
6. NOTE: No key replacement or re-initialization needs to occur with the removal or installation of a new PATS transceiver.
To install, reverse the removal procedure.