Mariner 2WD L4-2.3L VIN Z (2005)
Front Door Window Glass: Service and Repair
Front
FRONT DOOR WINDOW GLASS
Removal and Installation
1. Remove the front door trim panel.
2. Remove the screw and the door trim panel bracket.
3. Position the watershield aside.
4. Remove the interior door glass weatherstrip.
5. Connect the window control switch electrical connector.
6. Connect the battery.
7. Using the window control switch, lower the front door window glass to gain access to the front door window glass screws.
8. Disconnect the battery.
9. Disconnect the window control switch electrical connector.
10. Remove the 2 front door window glass screws.
-
To install, tighten to 5 Nm (44 lb-in).
11. Remove the front door window glass.
12. To install, reverse the removal procedure.
-
Cycle the front door window glass to make sure it is engaged correctly.
