mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Caliper Removal and Installation, Front|Page 4385 > < Caliper Removal and Installation, Front|Page 4383
Page 1
background image

Brake Caliper: Service and Repair
Caliper Disassembly and Assembly, Front

Brake Caliper

Material

Material 

WARNING:  Use of any other than approved DOT 3 motor vehicle brake fluid will cause permanent damage to brake components and will
render the brakes inoperative. Failure to follow these instructions may result in personal injury.

WARNING:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.

CAUTION:  Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with
water.

Disassembly and Assembly

1. Remove the disc brake caliper. 
2. Secure the brake caliper in a vise.
3. Remove the bleeder screw cap.
4. Remove the bleeder screw.

^

To install, tighten to 16 Nm (12 ft. lbs.).

Caliper Removal and Installation, Front|Page 4385 > < Caliper Removal and Installation, Front|Page 4383