mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Evaporative Emission Control Canister > < Canister Purge Control Valve|Diagrams|Page 3237
Page 1
background image

Evaporative Canister Filter: Service and Repair

DUST SEPARATOR

Removal and Installation

WARNING:

-

The evaporative emissions system contains fuel vapor and condensed fuel vapor. Although not present in large quantities, it still presents
the danger of explosion or fire. Disconnect the battery ground cable from the battery to minimize the possibility of an electrical spark
occurring, which can cause a fire or explosion if fuel vapor or liquefied fuel are present in the area. Failure to follow these instructions
can result in personal injury.

-

Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related component. Highly flammable
mixtures are always present and may be ignited. Failure to follow these instructions may result in personal injury.

1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the battery ground cable.
3. Disconnect the 2 fuel vapor hoses from the dust separator.
4. Slide the dust separator out of the retainer clip in the emission canister bracket.
5. To install, reverse the removal procedure.

Evaporative Emission Control Canister > < Canister Purge Control Valve|Diagrams|Page 3237