Mariner 2WD L4-2.3L VIN Z (2005)
Transmission Position Switch/Sensor: Service and Repair
Transmission Range (TR) Sensor
Special Tool(s)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the battery and tray.
3. Remove the Transmission Range (TR) sensor.
1
Disconnect the TR sensor electrical connector.
2
Remove the TR sensor retaining bolts.
3
Remove the TR sensor.
Installation
1. NOTE: Make sure the transaxle is in the NEUTRAL position.
Install the TR sensor and loosely install the bolts.
