Mariner 2WD L4-2.3L VIN Z (2005)
3. NOTE:
-
Slight turning of the clockspring rotor is allowable for alignment purposes to the steering column.
-
The clockspring is shown from the back for clarity.
Align the clockspring for installation.
-
Align the large slot to the large tab in the clockspring.
-
Align the small slot to the small tab in the clockspring.
4. Install the 3 clockspring screws.
5. For vehicles reusing a clockspring that was removed, remove the tape. For vehicles installing a new clockspring, remove the retaining pin.
6. Install the lower steering column shroud and the 3 screws.
7. Position the steering column completely downward and lock in place.
8. Install the upper steering column shroud and engage the retaining tabs.
9. Install the steering wheel.
10. Repower the system.
