Mariner 2WD L4-2.3L VIN Z (2005)
1. NOTE: Make sure the B-pillar and side impact severity sensor mating surfaces are clean and free of foreign material.
Align the side impact sensor locator tabs to the openings in the B-pillar sheet metal.
2. WARNING: The tightening torque of the air bag side impact sensor retaining bolts is critical for correct system operation.
Install the side impact sensor bolt.
-
Tighten to 9 Nm (80 lb-in).
3. Connect the side impact sensor electrical connector.
4. Install the B-pillar trim panel.
5. Repower the system.
