Mariner 2WD L4-2.3L VIN Z (2005)
Inertia Fuel Shutoff Switch: Service and Repair
INERTIA FUEL SHUTOFF (IFS) SWITCH
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the RH lower A-pillar trim panel.
3. Disconnect the inertia fuel shutoff (IFS) switch electrical connector
4. Remove the 2 bolts and the IFS switch.
-
To install, tighten to 10 Nm (89 lb-in).
5. To install, reverse the removal procedure.
