Mariner 2WD L4-2.3L VIN Z (2005)
7. Using the special tool, install the outer CV joint into the wheel hub.
8. Install a new wheel hub nut.
^
Tighten to 290 Nm (214 ft. lbs.).
9. Install the brake shoes.
Drum brake vehicles
10. Connect the brake line to the wheel cylinder.
^
Tighten to 17 Nm (13 ft. lbs.).
11. Install the brake line bracket bolt.
^
Tighten to 22 Nm (16 ft. lbs.).
12. Connect the parking brake cable to the brake backing plate and install the parking brake cable bracket bolt.
^
Tighten to 23 Nm (17 ft. lbs.).
13. Install the parking brake shoes.
All vehicles
14. Check and adjust the wheel alignment as necessary.
