Mariner 2WD L4-2.3L VIN Z (2005)
Transmission Cooler: Procedures
Transmission Fluid Cooler Backflushing and Cleaning
1. CAUTION: Flush with clean transmission fluid only. Do not use solvents, mineral spirits or water-based cleaners.
NOTE: Rubber hoses must be attached to the ends of the fluid cooler tubes, to aid in connecting them to the cleaner.
Backflush any contaminates out of the oil-to-air cooler by connecting the flushing machine pressure line to number 1 and the return line to number
2.
After 5 minutes, stop the machine, reverse the hoses and repeat the flushing.
2. Backflush any contaminants out of the radiator in-tank cooler by connecting the flushing machine pressure line to number 2 and the return line to
number 3.
After 5 minutes, stop the machine, reverse the hoses and repeat the flushing.