Mariner 2WD L4-2.3L VIN Z (2005)
clamp.
7. Connect the plastic retaining clip onto the frame.
8. Install the transmission fluid cooler hose onto the upper fitting of the cooler bypass valve. Install the other end of the hose to the lower radiator
fitting. Pull the red clip off the constant tension clamps to activate the clamp.
9. Start the vehicle and check the transmission fluid level.
^
Fill the transaxle with clean MERCON(R) V Automatic Transmission Fluid XT-5-QM meeting Ford specification MERCON(R) V.
Transmission Fluid Cooler Tubes
Transmission Fluid Cooler Tubes
Material
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
