Mariner 2WD L4-2.3L VIN Z (2005)
5. NOTE: The main control cover gasket is a reusable type. Inspect the gasket for damage. Install a new gasket as necessary.
Install the main control cover gasket.
6. NOTE: Install the cooler bypass valve studs in locations 3 and 11.
Install the main control cover. Tighten the bolts and studs in the indicated sequence.
^
Tighten to 13 Nm (10 ft. lbs.).
7. Using a small amount of pipe sealant on the threads, install the transaxle drain plug.
^
Tighten to 27 Nm (20 ft. lbs.).