Mariner 2WD L4-2.3L VIN Z (2005)
8. Install the LH splash shield.
9. Install the shift cable and bracket.
^
Tighten to 23 Nm (17 ft. lbs.).
10. Connect the shift cable end.
11. Connect the vent hose to the main control cover.
8. Install the LH splash shield.
9. Install the shift cable and bracket.
^
Tighten to 23 Nm (17 ft. lbs.).
10. Connect the shift cable end.
11. Connect the vent hose to the main control cover.