Mariner 2WD L4-2.3L VIN Z (2005)
Wiper Motor: Service and Repair
Windshield Wiper Motor
WINDSHIELD WIPER MOTOR
Removal and Installation
1. Remove the windshield wiper mounting arm and pivot shaft.
2. Remove the wiper motor linkage bolt.
-
To install, tighten to 17 Nm (13 lb-ft).
3. Remove the 3 bolts and the wiper motor.
-
To install, tighten to 15 Nm (11 lb-ft).
4. To install, reverse the removal procedure.