Mariner 2WD L4-2.5L Hybrid (2010)
4. Remove the RH instrument panel side finish panel. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.
-
Disconnect the upper-to-lower satellite radio antenna electrical connector.
Lower cable
5. Remove the RH Instrument panel side finish panel. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.
-
Disconnect the upper-to-lower satellite radio antenna electrical connector.
6. Remove the glove compartment. For additional information, refer to Instrument Panel - Exploded View in Instrument Cluster / Carrier &/or
Interior Moulding / Trim.
7. Remove the ACM. For additional information, refer to Audio Control Module (ACM) See: Cellular Phone/Communications Control
Module/Service and Repair/Removal and Replacement/Audio Control Module (ACM).
-
Disconnect the lower satellite radio antenna electrical connector from the ACM.
All cables
8. To install, reverse the removal procedure.
