Mariner 2WD L4-2.5L Hybrid (2010)
Keyless Entry Key-Pad: Testing and Inspection
Keyless Entry Keypad Code Programming
Programming a Personal Entry Code
NOTE: The system allows 3 personal codes to be programmed.
NOTE: Multiple personal codes can be programmed in one step. When programming multiple codes in one step, each code must be programmed by
entering each button within 5 seconds of each other. If 5 seconds elapse between any button press, programming mode is exited.
NOTE: If only a single personal code is desired or unable to program multiple codes in one step, each personal code can be programmed individually
by repeating Steps 1-5 for each code desired.
1. Enter the factory set 5-digit keyless entry keypad code.
2. Within 5 seconds, press the 1/2 button on the keypad to activate the programming mode.
3. Enter the new personal 5-digit keyless entry keypad code. Each number must be entered within 5 seconds of each other.
4. After entering the new personal code, press a 6th button to program each new code.
-
Pressing 1/2 stores the first personal code.
-
Pressing 3/4 stores the second personal code.
-
Pressing 5/6, 7/8 or 9/0 stores the third personal code.
5. The door locks lock and unlock to confirm the new code is programmed.
Erasing a Personal Entry Code
1. Enter the factory set 5-digit keyless entry keypad code.
2. Within 5 seconds, press the 1/2 button on the keypad and release.
3. Within 5 seconds, press and hold the 1/2 button for 2 seconds.
4. All personal codes are now erased and only the factory set 5-digit code works.
