Mariner 2WD L4-2.5L Hybrid (2010)
Locations information that can be found at the vehicle level will helps the user find where the various items depicted on the diagram can physically be
found on the vehicle. A brief written description of the location is given, along with a reference to the component location views.
WARNINGS
-
Always wear safety glasses for eye protection.
-
Use safety stands whenever a procedure requires being under a vehicle.
-
Be sure that the IGNITION SWITCH is always in the OFF position, unless otherwise required by the procedure.
-
Set the parking brake when working on any vehicle. An automatic transmission should be in PARK. A manual transmission should be in
NEUTRAL.
-
Operate the engine only in a well-ventilated area to avoid danger of carbon monoxide.
-
Keep away from moving parts, especially the fan and belts, when the engine is running.
-
To prevent serious burns, avoid contact with hot metal parts such as the radiator, exhaust manifold, tail pipe, catalytic converter and muffler.
-
Do not allow flame or sparks near the battery. Gases are always present in and around the battery set. An explosion could occur.
-
Do not smoke when working on a vehicle.
-
To avoid injury, always remove rings, watches, loose hanging jewelry and avoid wearing lose clothing.
-
To prevent the risk of high-voltage shock, always follow precisely all warnings and service instructions, including instructions to depower the
system. This system contains high voltage wiring and components. High-voltage cables and wiring are identified on the vehicle by orange harness
tape or orange wire covering. All high voltage components are marked on the vehicle with high voltage warning labels with a high voltage symbol.
This wiring diagram is intended as a support document to the Testing and Inspection Procedures and Computers and Control Systems Information.
Failure to follow the instructions may result in serious personal injury or death.
Symbols
