Mariner 2WD L4-2.5L Hybrid (2010)
a
No. 3 Journal - Supported by No. 1 and No. 5 journals
Main Bearing Cap
Install and tighten the 10 main bearing beam bolts.
Tighten the bolts in the sequence shown in 3 stages.
Stage 1: Tighten to..........................................................................................................................................................................................5 Nm (44 lb-in).
Stage 2: Tighten to.........................................................................................................................................................................................25 Nm (18 lb-ft).
Stage 3: Tighten an additional.................................................................................................................................................................................90 degrees.