mercury Workshop Repair Guides

Mercury Mariner 2WD Hybrid Workshop Service and Repair Manuals

Compressor to Condenser Discharge Line|Page 5664 > < Compressor to Condenser Discharge Line|Page 5662
Page 1
background image

Hose/Line HVAC: Service and Repair
Evaporator Outlet Line

Evaporator Outlet Line - Hybrid

Removal and Installation

NOTICE:  Motorcraft(R) Electric Compressor Oil only must be used as a refrigerant system lubricant for hybrid vehicles. Addition of any oil
other than Motorcraft(R) Electric Compressor Oil to the hybrid vehicle refrigerant system will damage the electric Air Conditioning (A/C)
compressor and contaminate the refrigerant system.

1. Recover the refrigerant.

2. Disconnect the low-charge protection switch electrical connector.

3. Remove the evaporator outlet line fitting nut and disconnect the fitting.

-

Discard the O-ring seal and gasket seal.

-

To install, tighten to 15 Nm (133 lb-in).

4. Remove the Thermostatic Expansion Valve (TXV) fitting nut and disconnect the fitting.

-

Discard the gasket seals.

-

To install, tighten to 15 Nm (133 lb-in).

5. Detach the evaporator outlet line from the A/C line bracket.

6. Remove the evaporator outlet line.

7. NOTICE:  Motorcraft(R) Electric Compressor Oil only must be used as a refrigerant system lubricant for hybrid vehicles. Addition of

Compressor to Condenser Discharge Line|Page 5664 > < Compressor to Condenser Discharge Line|Page 5662