Mariner 2WD L4-2.5L Hybrid (2010)
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
Escape
2. Remove the 4 fender splash shield bolts.
-
To install, tighten to 5 Nm (44 lb-in).
3. Remove the 4 fender splash shield pin-type retainers.
-
Position the fender splash shield aside.
4. Disconnect the fog lamp electrical connector.
5. Squeeze both tabs on the fog lamp bulb simultaneously and remove it from the fog lamp.
Mariner
6. Rotate the fog lamp bulb approximately one-eighth turn counterclockwise and remove.
-
Disconnect the electrical connector.
All vehicles
7. To install, reverse the removal procedure.
