Mariner 2WD L4-2.5L Hybrid (2010)
Drive Belt: Service and Repair
Accessory Drive Belt
Accessory Drive Belt
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the pin-type retainer, 5 bolts and the RH splash shield.
-
To install, tighten to 9 Nm (80 lb-in).
3. Rotate the accessory drive belt tensioner counterclockwise and remove the accessory drive belt.
4. To install, reverse the removal procedure.
