Mariner 2WD L4-2.5L Hybrid (2010)
Hose/Line HVAC: Service and Repair
Compressor to Condenser Discharge Line
Compressor to Condenser Discharge Line - Hybrid
Removal and Installation
NOTICE: Motorcraft(R) Electric Compressor Oil only must be used as a refrigerant system lubricant for hybrid vehicles. Addition of any oil
other than Motorcraft(R) Electric Compressor Oil to the hybrid vehicle refrigerant system will damage the electric Air Conditioning (A/C)
compressor and contaminate the refrigerant system.
1. Recover the refrigerant.
2. Remove the front bumper cover. For additional information, refer to Bumper.
3. Remove the condenser inlet fitting nut and disconnect the fitting.
-
Discard the O-ring seal.
-
To install, tighten to 15 Nm (133 lb-in).
4. Remove the 2 Motor Electronics (M/E) cooler pump bolts and position the pump aside.
-
To install, tighten to 20 Nm (177 lb-in).
