mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

ABOUT US
Output Shaft Speed (OSS) Sensor|Page 985 > < Output Shaft Speed (OSS) Sensor|Page 983

Mariner 2WD L4-2.5L Hybrid (2010)

Page 3
background image

11. Remove the main control-to-main control cover grommet.

12. NOTICE: The main control should be handled with care, damage to the main control may occur.

NOTE: Note the location of the different length bolts for assembly.

Remove the nut, 22 bolts and the main control.

13. Remove the main control-to-transaxle separator plate.

14. Remove the bolt and the OSS sensor.

Output Shaft Speed (OSS) Sensor|Page 985 > < Output Shaft Speed (OSS) Sensor|Page 983