mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

High Voltage Converter/Inverter|Page 4570 > < Initial Inspection and Diagnostic Overview|Page 4567
Page 1
background image

Auxiliary Power Outlet: Service and Repair
High Voltage Converter/Inverter

Alternating Current (AC) Powerpoint

Alternating Current (AC) Powerpoint

Removal and Installation

1. Disconnect the 12-volt battery. For additional information, refer to Battery.

2. Remove the console trim insert.

3. Disconnect the electrical connector and remove the AC power point.

4. To install, reverse the removal procedure.

Direct Current/Alternating Current (DC/AC) Inverter

Direct Current/Alternating Current (DC/AC) Inverter

High Voltage Converter/Inverter|Page 4570 > < Initial Inspection and Diagnostic Overview|Page 4567