Mariner 2WD V6-3.0L (2008)
Radio/Stereo: Procedures
Audio Unit Part Number Retrieval
AUDIO UNIT PART NUMBER RETRIEVAL
Audio Units Without Navigation
1. Turn the audio unit on.
2. Press and hold the front control interface module (FCIM) memory preset buttons 3 and 6 for 3 seconds. The speaker walk-around test will begin.
3. Before the speaker walk-around test is complete, press preset button 6.
4. Rotate the TUNE dial until the audio unit part number is displayed.
5. Record the audio unit part number.
6. Turn the audio unit off.
Audio Units With Navigation
1. Turn the audio unit on.
2. Press and hold preset buttons 3 and 6 for 3 seconds. The speaker walk-around test will begin.
3. Before the speaker walk-around test is complete, press END TEST on the display screen.
4. Select SYSTEM INFO from the menu.
5. Record the audio unit part number.
6. Turn the audio unit off.
Satellite Radio Receiver Electronic Serial Number (ESN) Retrieval
SATELLITE RADIO RECEIVER ELECTRONIC SERIAL NUMBER (ESN) RETRIEVAL
Audio Units Without Navigation
1. Operate the audio unit in satellite radio mode.
2. Press and hold the AUX button and preset button 1, simultaneously.
-
The satellite radio receiver electronic serial number (ESN) will be displayed on the front display interface module (FDIM) screen.
3. Record the satellite radio receiver ESN.
4. Turn the audio unit off.
Audio Units With Navigation
1. Turn the audio unit on.
2. Press the MENU button.
3. Select the SYSTEM INFO tab.
4. NOTE: The satellite radio receiver ESN is shown on the lower left corner of the screen with the text "SR ESN:".
Record the satellite radio receiver ESN.
5. Turn the audio unit off.
