Mariner 2WD V6-3.0L (2008)
Rear Bumper Cover With Trailer Hitch (Part 2)
Removal and Installation
1. Remove the rear bumper cover.
2. Remove the 2 trailer hitch-to-back panel bolts.
-
To install, tighten to 40 Nm (30 lb-ft).
3. Remove the 4 trailer hitch-to-body bolts.
-
To install, tighten to 90 Nm (66 lb-ft).
4. Remove the trailer hitch.
-
Disconnect the electrical connector from the trailer hitch.
5. To install, reverse the removal procedure.
