Mariner 2WD V6-3.0L (2008)
13. If equipped, remove the screw and the garment hook.
-
Open the garment hook screw cover.
-
Remove the garment hook screw.
-
To install, tighten to 7 Nm (62 lb-in).
14. NOTE: When installing the headliner trim ring, it should meet at the rear of the roof opening and have no gaps or overlaps.
If equipped, remove the headliner trim ring.
15. Remove the 5 headliner pin-type retainers.
16. Remove the headliner.
17. To install, reverse the removal procedure.
-
Transfer parts as necessary.
