Mariner 2WD V6-3.0L (2008)
Part 2
Removal and Installation
1. Close the roof opening panel glass.
2. Remove the headliner.
3. Disconnect the electrical connectors.
4. NOTE: Anytime a roof opening panel motor is removed, the cables/mechanisms can experience free-play movement. It is important that the
cables do not move. They are timed to be parallel with each other.
Remove the roof opening panel motor.
1
Remove the 3 roof opening panel motor screws.
2
Remove the roof opening panel motor.
-
To install, tighten to 8 Nm (71 lb-in).
5. To install, reverse the removal procedure.