Mariner 2WD V6-3.0L (2008)
Part 2
Disassembly and Assembly
Both rear seat backrests
1. Remove the rear seat backrest.
2. Remove the head restraint(s).
3. Remove the 2 screws and the latch cover.
4. Remove the 2 seat latch release cover screws.
5. Remove the seat latch release lever.
1
Detach the latch rod from the seat latch release lever.
-
To aid installation, lock the latch using a flat-blade screwdriver before connecting the latch rod.
2
Remove the seat latch release lever.
6. Release the backrest trim cover J-clip.