Mariner 2WD V6-3.0L (2008)
Brake Caliper: Service and Repair
Brake Caliper Anchor Plate, Front
Brake Caliper Anchor Plate
Removal and Installation
Disc Brake System - Exploded View
1. Remove the wheel and tire.
2. CAUTION: Do not allow the caliper to hang from the brake hose or damage to the hose can occur.
Remove the 2 brake caliper guide pin bolts and position the caliper aside.
^
Support the caliper using mechanic's wire.
3. Remove the 2 brake caliper anchor plate bolts.
^
To install, tighten to 175 Nm (129 lb-ft).
