Mariner 2WD V6-3.0L (2008)
cover.
5. Remove the 2 parking brake control bolts.
^
To install, tighten to 27 Nm (20 lb-ft).
6. Remove the 2 parking brake control nuts.
^
To install, tighten to 27 Nm (20 lb-ft).
7. Remove the parking brake control.
^
Disconnect the front parking brake cable.
8. NOTE: Make sure that the cable is in the groove on the control wheel prior to final tightening of fasteners.
To install, reverse the removal procedure.