Mariner 2WD V6-3.0L (2008)
Removal and Installation
1. With vehicle in NEUTRAL, position it on a hoist.
2. Drain the cooling system.
3. Remove the cooling fan motor and shroud.
4. Disconnect the radiator-to-degas bottle hose and upper radiator hose from the radiator.
5. Disconnect the lower degas bottle-to-radiator hose from the radiator.
6. Disconnect the lower radiator hose from the radiator.
7. Remove the 2 A/C condenser-to-radiator bolts and position aside the A/C condenser from the radiator.
^
To install, tighten to 8 Nm (71 lb-in).
8. Remove the radiator.
9. To install, reverse the removal procedure.
10. Fill and bleed the cooling system.
