Mariner 2WD V6-3.0L (2008)
Exhaust Resonator: Service and Repair
Resonator
Removal and Installation
CAUTION: Do not use oil or grease-based lubricants on the insulators. They may cause deterioration of the rubber.
CAUTION: Oil or grease-based lubricants on the insulators may cause the exhaust hanger insulator to separate from the exhaust hanger
bracket during vehicle operation.
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove and discard the 2 resonator nuts.
^
To install, tighten to 47 Nm (35 lb-ft).
3. Remove and discard the resonator exhaust hanger and remove the resonator.
^
Discard the gasket.
4. To install, reverse the removal procedure.
^
Install a new resonator gasket and nuts.
