Mariner 2WD V6-3.0L (2008)
Removal and Installation
NOTE: On vehicles equipped with dual-zone electronic automatic temperature control (EATC), the RH temperature blend door actuator is used to
control only the RH temperature blend door. On vehicles equipped with electronic manual temperature control (EMTC), the RH temperature blend door
actuator is used to control the single temperature blend door for both sides of the vehicle.
1. Remove the upper center instrument panel finish panel.
2. Remove the passenger airbag module.
3. Working through the passenger airbag module opening, remove the RH panel duct screw.
4. Working through the passenger airbag module opening, remove the upper RH center panel duct screw
