Mariner 2WD V6-3.0L (2008)
2. Release the fuel system pressure.
3. NOTE: Some residual fuel may remain in the fuel tubes after releasing the fuel system pressure. Upon disconnecting or removing any fuel tubes,
carefully drain any residual fuel into a suitable container.
Disconnect the fuel supply tube-to-fuel tube quick connect coupling.
4. Disconnect the fuel vapor tube-to-evaporative emission (EVAP) canister purge valve quick connect coupling.
5. Disconnect the fuel supply tube-to-fuel filter outlet spring lock coupling.
6. Disconnect the fuel vapor tube-to-fuel vapor tube assembly quick connect coupling.
7. Detach the fuel tube and the fuel vapor tube from the retainer clips and remove the tubes.
8. To install, reverse the removal procedure.
