Mariner 2WD V6-3.0L (2008)
8. CAUTION: During driver air bag module removal, make sure all 3 driver air bag module hooks are released from the steering wheel
wire clip. Failure to do so may cause damage to the driver air bag module and or the steering wheel.
NOTE: The driver air bag module is removed for clarity.
Position the 3-mm Allen wrench or suitable tool against the wire clip and push inward disengaging the wire clip from the 3 driver air bag module
hooks.
9. Disconnect the horn electrical connector. Then disconnect the 2 driver air bag module electrical connectors and remove the driver air bag module.
10. Open and lower the glove compartment door.
