Mariner 2WD V6-3.0L (2008)
NOTE: Apply the brake to keep the halfshaft from rotating.
Install a new front wheel hub nut.
^
Tighten to 300 Nm (222 lb-ft).
8. Install the front tire and wheel.
9. Check and fill the transaxle fluid as necessary.
Intermediate Shaft
Intermediate Shaft
Special Tool(s)
Intermediate Shaft
Removal and Installation
1. NOTE: If removing the intermediate shaft in order to repair a separate component, it should only be removed as an assembly with the RH front
drive halfshaft.
