Mariner 2WD V6-3.0L (2008)
5. CAUTION: Do not leave the lock ring in the disassembled position. This will weaken the ring and may prevent it from correctly locking
in place when reassembled, resulting in a leak.
Rotate the lock ring back to the original location.
6. Remove the 2 windshield washer reservoir bolts and the windshield washer reservoir.
-
To install, tighten to 6 Nm (53 lb-in).
7. CAUTION: Do not operate the washer pump prior to filling the windshield washer reservoir. Failure to follow these instructions may
result in premature pump failure.
To install, reverse the removal procedure.
-
Fill the windshield washer reservoir with windshield washer fluid.