Mariner 2WD V6-3.0L VIN 1 (2006)
Hood Latch: Service and Repair
Hood Latch
HOOD LATCH
Removal
1. Remove the hood latch nut.
2. NOTE: Mark the hood latch position prior to removal of the hood latch bolts.
Remove the 2 hood latch bolts.
3. Remove the hood latch.
1
Release the cable conduit.
2
Disconnect the cable.
Installation
1. Connect the hood latch release cable and conduit to the hood latch.
1
Connect the cable.
2
Engage the cable conduit.
2. NOTE: When the hood latch is installed, the latch adjustment must be checked to make sure the latch is installed and aligned correctly.
Position the hood latch with the alignment marks and install the 2 hood latch bolts.
-
Tighten to 9 Nm (80 lb-in).